Common Solid Wood Floor Problem Bulging and Lifting

My solid hardwood flooring is bulging and lifting at the center of my area.

In case you’ve installed solid hardwood floors and you are discovering that it is bulging and lifting at the center of your area, you aren’t alone. Solid hardwood floors that lifts and adheres in the center of chambers is, sadly, a relatively common issue. More frequently than not, the origin of the issue lies with the first installation of this solid hardwood floors.

Wood, as you’re aware, is an entirely natural product and as such contracts and expands with changes in atmospheric conditions. If solid hardwood flooring are fitted with no expansion gap, difficulties, which could occasionally be severe, will likely arise.

Strong hardwood flooring takes in moisture whenever there is a high level of humidity from the atmosphere and then the floor lets that moisture move when the humidity in the atmosphere reduces . Low, or decreasing humidity causes the wood to contract . This expansion and contraction process is entirely normal with solid hardwood floors .

At a domestic setting, particularly in centrally heated homes, floors expand and contract with the seasons. During winter months, when you switch the heat on, wooden floors lose moisture and will contract. The outcome is often small gaps between the boards. In the warmer months, once the heating is switched off, the wood will expand again. The rising moisture in the air, which can be absorbed by the floor, causes this.

While this occurs, if any gaps have appeared over winter, they will most likely vanish. This organic process of expansion and contraction is not likely to pose any sort of damage or distortion to a solid hardwood flooring as long as it has been nicely fitted, with the required expansion gap.

If you’re experiencing issues with your floor bulging and raising in the center of your room, the odds are that the essential expansion gap hasn’t been permitted for during your flooring setup. In order to illustrate, when a floor expands and touches a wall or door frame (called in the trade as a”pinch point”), the boards come under pressure, making them rise. This is more than likely the cause of bulging and lifting of your floorboards in the center of your room.

Leave a comment